Documentation

Publish Events to Webhook

MinIO supports publishing bucket notification events to a Webhook service endpoint.

Add a Webhook Endpoint to a MinIO Deployment

The following procedure adds a new Webhook service endpoint for supporting bucket notifications in a MinIO deployment.

Prerequisites

MinIO mc Command Line Tool

This procedure uses the mc command line tool for certain actions. See the mc Quickstart for installation instructions.

1) Add the Webhook Endpoint to MinIO

You can configure a new Webhook service endpoint using either environment variables or by setting runtime configuration settings.

MinIO supports specifying the Webhook service endpoint and associated configuration settings using environment variables. The minio server process applies the specified settings on its next startup.

The following example code sets all environment variables related to configuring an Webhook service endpoint. The minimum required variables are MINIO_NOTIFY_WEBHOOK_ENABLE and MINIO_NOTIFY_WEBHOOK_ENDPOINT:

set MINIO_NOTIFY_WEBHOOK_ENABLE_<IDENTIFIER>="on"
set MINIO_NOTIFY_WEBHOOK_ENDPOINT_<IDENTIFIER>="ENDPOINT"
set MINIO_NOTIFY_WEBHOOK_AUTH_TOKEN_<IDENTIFIER>="<string>"
set MINIO_NOTIFY_WEBHOOK_QUEUE_DIR_<IDENTIFIER>="<string>"
set MINIO_NOTIFY_WEBHOOK_QUEUE_LIMIT_<IDENTIFIER>="<string>"
set MINIO_NOTIFY_WEBHOOK_CLIENT_CERT_<IDENTIFIER>="<string>"
set MINIO_NOTIFY_WEBHOOK_CLIENT_KEY_<IDENTIFIER>="<string>"
set MINIO_NOTIFY_WEBHOOK_COMMENT_<IDENTIFIER>="<string>"
  • Replace <IDENTIFIER> with a unique descriptive string for the Webhook service endpoint. Use the same <IDENTIFIER> value for all environment variables related to the new target service endpoint. The following examples assume an identifier of PRIMARY.

    If the specified <IDENTIFIER> matches an existing Webhook service endpoint on the MinIO deployment, the new settings override any existing settings for that endpoint. Use mc admin config get notify_webhook to review the currently configured Webhook endpoints on the MinIO deployment.

  • Replace <ENDPOINT> with the URL of the Webhook service endpoint. For example:

    https://webhook.example.com

See Webhook Service for Bucket Notifications for complete documentation on each environment variable.

MinIO supports adding or updating Webhook endpoints on a running minio server process using the mc admin config set command and the notify_webhook configuration key. You must restart the minio server process to apply any new or updated configuration settings.

The following example code sets all settings related to configuring an Webhook service endpoint. The minimum required setting is notify_webhook endpoint:

mc admin config set ALIAS/ notify_webhook:IDENTIFIER \
   endpoint="<ENDPOINT>" \
   auth_token="<string>" \
   queue_dir="<string>" \
   queue_limit="<string>" \
   client_cert="<string>" \
   client_key="<string>" \
   comment="<string>"
  • Replace IDENTIFIER with a unique descriptive string for the Webhook service endpoint. The following examples in this procedure assume an identifier of PRIMARY.

    If the specified IDENTIFIER matches an existing Webhook service endpoint on the MinIO deployment, the new settings override any existing settings for that endpoint. Use mc admin config get notify_webhook to review the currently configured Webhook endpoints on the MinIO deployment.

  • Replace ENDPOINT with the URL of the Webhook service endpoint. For example:

    https://webhook.example.com

See Webhook Bucket Notification Configuration Settings for complete documentation on each setting.

2) Restart the MinIO Deployment

You must restart the MinIO deployment to apply the configuration changes. Use the mc admin service restart command to restart the deployment.

mc admin service restart ALIAS

Replace ALIAS with the alias of the deployment to restart.

The minio server process prints a line on startup for each configured Webhook target similar to the following:

SQS ARNs: arn:minio:sqs::primary:webhook

You must specify the ARN resource when configuring bucket notifications with the associated Webhook deployment as a target.

Identifying the ARN for your bucket notifications

You defined the <IDENTIFIER> to assign to the target ARN for your bucket notifications when creating the endpoint previously. The steps below return the ARNs configured on the deployment. Identify the ARN created previously by looking for the <IDENTIFIER> you specified.

Review the JSON output

  1. Copy and run the following command, replacing ALIAS with the alias of the deployment.

    mc admin info --json ALIAS
    
  2. In the JSON output, look for the key info.sqsARN.

    The ARN you need is the value of that key that matches the <IDENTIFIER> you specified.

    For example, arn:minio:sqs::primary:webhook.

Use jq to parse the JSON for the value

  1. Install jq

  2. Copy and run the following command, replacing ALIAS with the alias of the deployment.

    mc admin info --json ALIAS | jq  .info.sqsARN
    

    This returns the ARN to use for notifications, such as arn:minio:sqs::primary:webhook

3) Configure Bucket Notifications using the Webhook Endpoint as a Target

Use the mc event add command to add a new bucket notification event with the configured Webhook service as a target:

mc event add ALIAS/BUCKET arn:minio:sqs::primary:webhook \
  --event EVENTS
  • Replace ALIAS with the alias of a MinIO deployment.

  • Replace BUCKET with the name of the bucket in which to configure the event.

  • Replace EVENTS with a comma-separated list of events for which MinIO triggers notifications.

Use mc event ls to view all configured bucket events for a given notification target:

mc event ls ALIAS/BUCKET arn:minio:sqs::primary:webhook

4) Validate the Configured Events

Perform an action on the bucket for which you configured the new event and check the Webhook service for the notification data. The action required depends on which events were specified when configuring the bucket notification.

For example, if the bucket notification configuration includes the s3:ObjectCreated:Put event, you can use the mc cp command to create a new object in the bucket and trigger a notification.

mc cp ~/data/new-object.txt ALIAS/BUCKET

Update an Webhook Endpoint in a MinIO Deployment

The following procedure updates an existing Webhook service endpoint for supporting bucket notifications in a MinIO deployment.

Prerequisites

MinIO mc Command Line Tool

This procedure uses the mc command line tool for certain actions. See the mc Quickstart for installation instructions.

1) List Configured Webhook Endpoints In The Deployment

Use the mc admin config get command to list the currently configured Webhook service endpoints in the deployment:

mc admin config get ALIAS/ notify_webhook

Replace ALIAS with the alias of the MinIO deployment.

The command output resembles the following:

notify_webhook:primary endpoint="https://webhook.example.com" auth_token="" queue_limit="0" queue_dir="" client_cert="" client_key=""
notify_webhook:secondary endpoint="https://webhook.example.com" auth_token="" queue_limit="0" queue_dir="" client_cert="" client_key=""

The notify_webhook key is the top-level configuration key for an Webhook Service Notification Settings. The endpoint key specifies the Webhook service endpoint for the given notify_webhook key. The notify_webhook:<IDENTIFIER> suffix describes the unique identifier for that Webhook service endpoint.

Note the identifier for the Webhook service endpoint you want to update for the next step.

2) Update the Webhook Endpoint

Use the mc admin config set command to set the new configuration for the Webhook service endpoint:

mc admin config set ALIAS/ notify_webhook:IDENTIFIER \
   endpoint="<ENDPOINT>" \
   auth_token="<string>" \
   queue_dir="<string>" \
   queue_limit="<string>" \
   client_cert="<string>" \
   client_key="<string>" \
   comment="<string>"

The notify_webhook endpoint configuration setting is the minimum required for an Webhook service endpoint. All other configuration settings are optional. See Webhook Service Notification Settings for a complete list of Webhook configuration settings.

3) Restart the MinIO Deployment

You must restart the MinIO deployment to apply the configuration changes. Use the mc admin service restart command to restart the deployment.

mc admin service restart ALIAS

Replace ALIAS with the alias of the deployment to restart.

The minio server process prints a line on startup for each configured Webhook target similar to the following:

SQS ARNs: arn:minio:sqs::primary:webhook

4) Validate the Changes

Perform an action on a bucket which has an event configuration using the updated Webhook service endpoint and check the Webhook service for the notification data. The action required depends on which events were specified when configuring the bucket notification.

For example, if the bucket notification configuration includes the s3:ObjectCreated:Put event, you can use the mc cp command to create a new object in the bucket and trigger a notification.

mc cp ~/data/new-object.txt ALIAS/BUCKET