Publish Server or Audit Logs to an External Service

MinIO publishes all minio server operations to the system console. Reading these logs depends on how the server process is managed. For example, if the server is managed through a systemd script, you can read the logs using journalctl -u SERVICENAME.service. Replace SERVICENAME with the name of the MinIO service.

MinIO also supports publishing server logs and audit logs to an HTTP webhook.

Server logs contain the same minio server operations logged to the system console. Server logs support general monitoring and troubleshooting of operations.
Audit logs are more granular descriptions of each operation on the MinIO deployment. Audit logging supports security standards and regulations which require detailed tracking of operations.

MinIO publishes logs as a JSON document as a PUT request to each configured endpoint. The endpoint server is responsible for processing each JSON document. MinIO requires explicit configuration of each webhook endpoint and does not publish logs to a webhook by default.

Publish Server Logs to HTTP Webhook

You can configure a new HTTP webhook endpoint to which MinIO publishes minio server logs using either environment variables or by setting runtime configuration settings.

Environment Variables

MinIO supports specifying the minio server log HTTP webhook endpoint and associated configuration settings using environment variables.

The following example code sets all environment variables related to configuring a log HTTP webhook endpoint. The minimum required variables are:

set MINIO_LOGGER_WEBHOOK_ENABLE_<IDENTIFIER>="on"
set MINIO_LOGGER_WEBHOOK_ENDPOINT_<IDENTIFIER>="https://webhook-1.example.net"
set MINIO_LOGGER_WEBHOOK_AUTH_TOKEN_<IDENTIFIER>="TOKEN"

Replace <IDENTIFIER> with a unique descriptive string for the HTTP webhook endpoint. Use the same <IDENTIFIER> for all environment variables related to the new log HTTP webhook.

If the specified <IDENTIFIER> matches an existing log endpoint, the new settings override any existing settings for that endpoint. Use mc admin config get logger_webhook to review the currently configured log HTTP webhook endpoints.
Replace https://webhook-1.example.net with the URL of the HTTP webhook endpoint.
Replace TOKEN with an authentication token of the appropriate type for the endpoint. Omit for endpoints which do not require authentication.

To allow for a variety of token types, MinIO creates the request authentication header using the value exactly as specified. Depending on the endpoint, you may need to include additional information.

For example: for a Bearer token, prepend Bearer:
```
set MINIO_LOGGER_WEBHOOK_AUTH_TOKEN_myendpoint="Bearer 1a2b3c4f5e"
```
Modify the value according to the endpoint requirements. A custom authentication format could resemble the following:
```
set MINIO_LOGGER_WEBHOOK_AUTH_TOKEN_xyz="ServiceXYZ 1a2b3c4f5e"
```
Consult the documenation for the desired service for more details.

Restart the MinIO server to apply the new configuration settings. You must specify the same environment variables and settings on all MinIO servers in the deployment.

Configuration Settings

MinIO supports adding or updating log HTTP webhook endpoints on a MinIO deployment using the mc admin config set command and the logger_webhook configuration key. You must restart the MinIO deployment to apply any new or updated configuration settings.

The following example code sets all settings related to configuring a log HTTP webhook endpoint. The minimum required setting is logger_webhook endpoint:

mc admin config set ALIAS/ logger_webhook:IDENTIFIER  \
   endpoint="https://webhook-1.example.net"           \
   auth_token="TOKEN"

Replace <IDENTIFIER> with a unique descriptive string for the HTTP webhook endpoint. Use the same <IDENTIFIER> for all environment variables related to the new log HTTP webhook.

If the specified <IDENTIFIER> matches an existing log endpoint, the new settings override any existing settings for that endpoint. Use mc admin config get logger_webhook to review the currently configured log HTTP webhook endpoints.
Replace https://webhook-1.example.net with the URL of the HTTP webhook endpoint.
Replace TOKEN with an authentication token of the appropriate type for the endpoint. Omit for endpoints which do not require authentication.

To allow for a variety of token types, MinIO creates the request authentication header using the value exactly as specified. Depending on the endpoint, you may need to include additional information.

For example: for a Bearer token, prepend Bearer:
```
 mc admin config set ALIAS/ logger_webhook    \
    endpoint="https://webhook-1.example.net"  \
    auth_token="Bearer 1a2b3c4f5e"
```
Modify the value according to the endpoint requirements. A custom authentication format could resemble the following:
```
mc admin config set ALIAS/ logger_webhook    \
   endpoint="https://webhook-1.example.net"  \
   auth_token="ServiceXYZ 1a2b3c4f5e"
```
Consult the documenation for the desired service for more details.

Publish Audit Logs to HTTP Webhook

You can configure a new HTTP webhook endpoint to which MinIO publishes audit logs using either environment variables or by setting runtime configuration settings:

Environment Variables

MinIO supports specifying the audit log HTTP webhook endpoint and associated configuration settings using environment variables.

The following example code sets all environment variables related to configuring a audit log HTTP webhook endpoint. The minimum required variables are:

set MINIO_AUDIT_WEBHOOK_ENABLE_<IDENTIFIER>="on"
set MINIO_AUDIT_WEBHOOK_ENDPOINT_<IDENTIFIER>="https://webhook-1.example.net"
set MINIO_AUDIT_WEBHOOK_AUTH_TOKEN_<IDENTIFIER>="TOKEN"
set MINIO_AUDIT_WEBHOOK_CLIENT_CERT_<IDENTIFIER>="cert.pem"
set MINIO_AUDIT_WEBHOOK_CLIENT_KEY_<IDENTIFIER>="cert.key"

Replace <IDENTIFIER> with a unique descriptive string for the HTTP webhook endpoint. Use the same <IDENTIFIER> for all environment variables related to the new audit log HTTP webhook.

If the specified <IDENTIFIER> matches an existing log endpoint, the new settings override any existing settings for that endpoint. Use mc admin config get audit_webhook to review the currently configured audit log HTTP webhook endpoints.
Replace https://webhook-1.example.net with the URL of the HTTP webhook endpoint.
Replace TOKEN with an authentication token of the appropriate type for the endpoint. Omit for endpoints which do not require authentication.

To allow for a variety of token types, MinIO creates the request authentication header using the value exactly as specified. Depending on the endpoint, you may need to include additional information.

For example: for a Bearer token, prepend Bearer:
```
set MINIO_AUDIT_WEBHOOK_AUTH_TOKEN_myendpoint="Bearer 1a2b3c4f5e"
```
Modify the value according to the endpoint requirements. A custom authentication format could resemble the following:
```
set MINIO_AUDIT_WEBHOOK_AUTH_TOKEN_xyz="ServiceXYZ 1a2b3c4f5e"
```
Consult the documenation for the desired service for more details.
Replace cert.pem and cert.key with the public and private key of the x.509 TLS certificates to present to the HTTP webhook server. Omit for endpoints which do not require clients to present TLS certificates.

Restart the MinIO server to apply the new configuration settings. You must specify the same environment variables and settings on all MinIO servers in the deployment.

Configuration Settings

MinIO supports adding or updating audit log HTTP webhook endpoints on a MinIO deployment using the mc admin config set command and the audit_webhook configuration key. You must restart the MinIO deployment to apply any new or updated configuration settings.

The following example code sets all settings related to configuring a audit log HTTP webhook endpoint. The minimum required setting is audit_webhook endpoint:

mc admin config set ALIAS/ audit_webhook:IDENTIFIER  \
   endpoint="https://webhook-1.example.net"          \
   auth_token="TOKEN"                                \
   client_cert="cert.pem"                            \
   client_key="cert.key"

Replace <IDENTIFIER> with a unique descriptive string for the HTTP webhook endpoint. Use the same <IDENTIFIER> for all environment variables related to the new audit log HTTP webhook.

If the specified <IDENTIFIER> matches an existing log endpoint, the new settings override any existing settings for that endpoint. Use mc admin config get audit_webhook to review the currently configured audit log HTTP webhook endpoints.
Replace https://webhook-1.example.net with the URL of the HTTP webhook endpoint.
Replace TOKEN with an authentication token of the appropriate type for the endpoint. Omit for endpoints which do not require authentication.

To allow for a variety of token types, MinIO creates the request authentication header using the value exactly as specified. Depending on the endpoint, you may need to include additional information.

For example: for a Bearer token, prepend Bearer:
```
 mc admin config set ALIAS/ audit_webhook     \
    endpoint="https://webhook-1.example.net"  \
    auth_token="Bearer 1a2b3c4f5e"
```
Modify the value according to the endpoint requirements. A custom authentication format could resemble the following:
```
mc admin config set ALIAS/ audit_webhook     \
   endpoint="https://webhook-1.example.net"  \
   auth_token="ServiceXYZ 1a2b3c4f5e"
```
Consult the documenation for the desired service for more details.
Replace cert.pem and cert.key with the public and private key of the x.509 TLS certificates to present to the HTTP webhook server. Omit for endpoints which do not require clients to present TLS certificates.

Audit Log Structure

MinIO audit logs resemble the following JSON document:

The api.timeToFirstByte and api.timeToResponse fields are expressed in nanoseconds.
For erasure coded setups tags.objectErasureMap provides per-object details on the following:
- The Server Pool on which the object operation was performed.
- The erasure set on which the object operation was performed.
- The list of drives in the erasure set which participated in the object operation.

{
   "version": "1",
   "deploymentid": "8ca2b7ad-20cf-4d07-9efb-28b2f519f4a5",
   "time": "2024-02-29T19:39:25.744431903Z",
   "event": "",
   "trigger": "incoming",
   "api": {
      "name": "CompleteMultipartUpload",
      "bucket": "data",
      "object": "test-data.csv",
      "status": "OK",
      "statusCode": 200,
      "rx": 267,
      "tx": 358,
      "txHeaders": 387,
      "timeToFirstByte": "2096989ns",
      "timeToFirstByteInNS": "2096989",
      "timeToResponse": "2111986ns",
      "timeToResponseInNS": "2111986"
   },
   "remotehost": "127.0.0.1",
   "requestID": "17B86CB0ED88EBE9",
   "userAgent": "MinIO (linux; amd64) minio-go/v7.0.67 mc/RELEASE.2024-02-24T01-33-20Z",
   "requestPath": "/data/test-data.csv",
   "requestHost": "minio.example.net:9000",
   "requestQuery": {
      "uploadId": "OGNhMmI3YWQtMjBjZi00ZDA3LTllZmItMjhiMmY1MTlmNGE1LmU3MjNlNWI4LTNiYWYtNDYyNy1hNzI3LWMyNDE3NTVjMmMzNw"
   },
   "requestHeader": {
      "Accept-Encoding": "zstd,gzip",
      "Authorization": "AWS4-HMAC-SHA256 Credential=minioadmin/20240229/us-east-1/s3/aws4_request, SignedHeaders=content-type;host;x-amz-content-sha256;x-amz-date, Signature=ccb3acdc1763509a88a7e4a3d7fe431ef0ee5ca3f66ccb430d5a09326e87e893",
      "Content-Length": "267",
      "Content-Type": "application/octet-stream",
      "User-Agent": "MinIO (linux; amd64) minio-go/v7.0.67 mc/RELEASE.2024-02-24T01-33-20Z",
      "X-Amz-Content-Sha256": "d61969719ee94f43c4e87044229b7a13b54cab320131e9a77259ad0c9344f6d3",
      "X-Amz-Date": "20240229T193925Z"
   },
   "responseHeader": {
      "Accept-Ranges": "bytes",
      "Content-Length": "358",
      "Content-Type": "application/xml",
      "ETag": "1d9fdc88af5e74f5eac0a3dd750ce58e-2",
      "Server": "MinIO",
      "Strict-Transport-Security": "max-age=31536000; includeSubDomains",
      "Vary": "Origin,Accept-Encoding",
      "X-Amz-Id-2": "dd9025bab4ad464b049177c95eb6ebf374d3b3fd1af9251148b658df7ac2e3e8",
      "X-Amz-Request-Id": "17B86CB0ED88EBE9",
      "X-Content-Type-Options": "nosniff",
      "X-Xss-Protection": "1; mode=block"
   },
   "tags": {
      "objectLocation": {
            "name": "Mousepad Template-v03final.jpg",
            "poolId": 1,
            "setId": 1,
            "disks": [
               "/mnt/drive-1",
               "/mnt/drive-2",
               "/mnt/drive-3",
               "/mnt/drive-4"
            ]
      }
   },
   "accessKey": "minioadmin"
}